Affordable Computer Hardware direct to your doorstep

Close
(0) items
You have no items in your shopping cart.
Product Categories
    Filters
    Preferences
    Search
    Manufacturer: TP-Link

    TP-Link CPE210 2.4GHz 300Mbps 9dBi High Power Outdoor CPE/Access Point

    R 919,00
    SKU: TP CPE210
    • Built-in 9dBi 2x2 dual-polarized directional MIMO antenna
    • Adjustable transmission power from 0 to 27dBm/500mw
    • System-level optimizations for more than 5km long range wireless transmission
    • TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
    • Centralized Management System - Pharos Control
    • AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes
    • Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely

    TP-LINK’s 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications.  Professional performance, coupled with user-friendly design, makes CPE210 an ideal choice for both business and home users

    With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE210 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -30℃ (-22℉) to +70 ℃ (158℉)

    As network scale increases, wireless competition and collisions among CPEs and base stations will be so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user experience. To mitigate these effects, the CPE210 uses MAXtream TDMA Technology

    CPE210 also comes equipped with centralized management software that helps users easily manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control

    Specifications:

    HARDWARE FEATURES
    Processor Qualcomm Atheros 560MHz CPU, MIPS 74Kc
    Memory 64MB DDR2 RAM, 8MB Flash
    Interface 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)
    1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough)
    1 Grounding Terminal
    1 Reset Button
    Power Supply Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)
    Voltage range: 16-27VDC
    Dimensions (W X D X H) 224 x 79 x 60 mm
    Power Consumption 10.5 Watts Max
    Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.
    Antenna Type Built-in 9dBi 2x2 Dual-polarized Directional Antenna
    Beam Width: 65° (H-Plane) / 35° (E-Plane)
    Note: For more details, please refer to datasheet
    Protection 15KV ESD Protection
    6KV Lightning Protection
    Enclosure Outdoor ASA stabilized plastic material
    IPX5 waterproof Certification
    WIRELESS FEATURES
    Wireless Standards IEEE 802.11b/g/n (with Pharos MAXtream disabled)
    Proprietary Protocol TDMA Mode (with Pharos MAXtream enabled)
    Wireless Speeds Up to 300Mbps (40MHz,Dynamic)
    Up to 144.4Mbps (20MHz,Dynamic)
    Up to 72.2Mbps (10MHz,Dynamic)
    Up to 36.1Mbps (5MHz,Dynamic)
    Frequency 2.4~2.483GHz
    Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.
    Transmission Power 27dBm/500mw (Adjustable power by 1dBm)
    Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.
    SOFTWARE FEATURES
    Wireless Configurations Pharos MAXtream TDMA Technology
    802.11b/g/n Modes
    Selectable Channel Width: 5/10/20/40MHz
    Automatic Channel Selection
    Transmission Power Control
    Dynamic Frequency Selection (DFS)
    WDS Enable/Disable
    Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
    SSID Broadcast Enable/Disable
    Multi-SSID with VLAN Tagging (AP mode only)
    Distance/ACK Timeout Setting
    Wireless MAC Address Filter
    Wireless Advanced:
    > Beacon Interval/RTS Threshold/Fragmentation
    >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
    Management Discovery and Remote Management via Pharos Control application
    HTTP/HTTPS Web-based management
    System Log
    SNMP Agent(v2c)
    Ping Watch Dog
    Dynamic DDNS
    SSH Server
    System Tools Wireless Signal Quality Indicators:
    Signal Strength/Noise/Transmit CCQ/CPU/Memory
    Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
    Spectrum Analyzer
    Speed Test
    Ping
    Traceroute
    System-level Optimizations Optimized IGMP Snooping/Proxy for multicast applications
    Hardware watch dog
    POE ADAPTER FEATURES
    Interfaces 1 AC Jack with Earth Ground
    1 10/100/1000Mbps Shielded Ethernet Port (Power + Data)
    1 10/100/1000Mbps Shielded Ethernet Port (Data)
    Efficiency >80%
    Button Remote Reset Button
    Certifications CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
    Power Status LEDs 0~0.8A: Green
    0.8A~1.0A: Red
    Output 24VDC, 1.0A Max
    +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
    Input Voltage 100VA~240VAC @ 50Hz~60Hz
    Dimensions(W x D x H) 110*57*33.5mm
    Input Current 0.8A Max @ 100VAC
    Input 100-240VAC, 50/60Hz
    Output Voltage 24VDC(+4,5pins; -7,8pins)